• Metal Machining »
• Metal Cutting
• Grinding/Polishing
• Welding »
• Soldering
• Nuisances & Process Dust
• Extruding/Molding
• EDM
• Cold Heading
• Tobacco Smoke
• Manicure Nail Dust
• Residential
• Commercial Kitchen Exhaust
• Isolation Rooms/Labs

• Air Cleaners Sizing
• Heat Loss Calculator
• AC Loss Calculator
• Links
• Articles
• Why Choose Air Quality Engineering?
• FAQ
• AQE Customers

Why Choose Air Cleaners and Air Filtration Systems from Air Quality Engineering?

If you've been searching for air cleaners and air filtration systems that will solve your indoor air quality problems, then you have likely been flooded with information from a variety of sources. One question you are sure to be asking, "Why should I buy air cleaners from you?"

Air Quality Engineering, Inc. can answer that question with some of the most innovative and unique air cleaners currently available on the market today. In addition to the products featured below, Air Quality Engineering offers something else unique in the air cleaner industry. All equipment is designed with the user in mind. As a result, all of our air cleaners* include all necessary control circuitry eliminating the need for any additional control circuitry to be purchased like motor starters, thermal protection, electrical disconnects etc. Units come with a molded plug where applicable or pigtailed for 3 phase. Dual voltage motors are pre-wired to your specifications. This translates to additional cost savings to you and easier air cleaner installations.

So before making your purchasing decision with any air cleaner manufacturer, be sure to find out what is included and what will be required before operating your new equipment. Motor starters, thermal protection and wiring can easily cost in excess of an additional $1000.

* Note The AQE8000 is the only air filtration unit by Air Quality Engineering requiring a motor starter and thermal protection be added.

AIR QUALITY ENGINEERING'S UNIQUE AIR CLEANER AND AIR FILTRATION PRODUCTS

The MistBuster Series of air cleaners and filtration systems from Air Quality Engineering represent the latest technology designed specifically for the filtration of coolants and smoke from today's modern machine tools. Utilizing both mechanical impingement and electrostatic precipitation filtration, the MistBuster Series is state of the art in liquid separation, without any disposable filters to purchase.

The MistBuster 500 is an extremely compact, high efficiency machining mist eliminator designed for being mounted or ducted directly to machine tools. Optional installation accessories include a pedestal stand, machine mount stand, wall mount and ceiling mount kits to maximize versatility of this air cleaner. Compact and lightweight, only 71 actual pounds, this unit deliver 500 cfm of high efficiency filtration. Utilizing 4 inches of mechanical impingement with an electrostatic post filter the MistBuster 500 is state of the art in liquid separation, without any disposable filters to purchase. For the ultimate in high efficiency air cleaner performance, an optional HEPA filter with over 300 square feet of media area is also available.

The MistBuster 500 has significant advantages over competitive air filtration products, including:

• High Efficiency on mist & smoke generated from water soluble, synthetic and petroleum based metalworking fluids. (Centrifugal units do not remove any smoke!)
• Economical operation: No throwaway air filters that reduce airflow as they clog up. Low energy consumption due to superior multi stage air cleaning technology that has low resistance to airflow.
• Variable speed controller allows for precise control of the airflow. Why draw more mist laden air than is needed out of the machine tool enclosure? The MistBuster is the only machine mount unit currently available in the market place that allows you to control the negative pressure within the machine tool enclosure. This feature saves energy, reduces maintenance and lowers sound levels.
• The air mover within the MistBuster is a very high quality German built motorized impeller. This impeller is more compact and energy efficient than conventional direct drive motors & blowers that are used in other air filtration systems.
• Can ship the MistBuster air cleaner via UPS, which significantly reduces shipping charges.

This air cleaner is easily installed directly to machine tool enclosure or ducted using optional plenum and flex hose. MistBuster comes complete with a 10' power cord with standard molded plug.

"Millions of workers engaged in the manufacture of automobiles, farm equipment, aircraft, heavy machinery, and other hardware are exposed to machining fluids. Occupational exposure to these fluids has resulted in various cancers, respiratory diseases, and skin problems. ......In order to improve worker protection, OSHA is designating metalworking/machining fluid exposure as a priority for comprehensive rulemaking" US Department of Labor

Contact Air Quality Engineering for additional information about air cleaners and receive a FREE copy of the Clean Air Guide! You can also reach Air Quality Engineering toll free at 888-883-3273.